Back

• Direct drive, non-geared, D-flange mounted airend.
• Modulating, vertical inlet valve.
• Heavy-duty, 5 micron, dry canister-type, inlet air filter.
• 230 or 460/3/60 1.15 SF, ODP, EPAct "energy efficient" drive motor. 1800 or 3600 RPM.
• DX models include a 125 or 200 hp oversized drive motor designed not to run into the service factor at 100/125 p.s.i.
• Airend and motor shaft are coupled through a permanently aligned, resilient, cushion-type, flexible coupling.
• Stainless steel control lines.
• Unitized airend/motor assembly mounted to the compressor base with all angle elastomer vibration isolators.
• ASME coded air/oil reservoir with
• Eliminator separator element.
• Air or Water cooled - Oil cooler/after cooler.
• Air cooled models have a heavy duty radiator type heat exchanger with a thermally controlled, totally enclosed fan motor.
• Water cooled models have a shell and tube type heat exchanger.
• Thermostatic oil mixing valve.
• Package mounted moisture separator and trap.
• Rigid steel base with fork lift slots.
• Pressure relief valve and discharge check valve.
• Automatic blow down valve through inlet filter.
• Minimum discharge pressure valve.
• Lube system includes all galvanized steel fittings and piping.
• Factories fill with AEON 9000 Rotary
• Screw Lubricant.
• NEMA 12 control/electrical enclosure include UL listed and CSA certified electrics.
• Auto Sentry "ES+"microprocessor based, fully programmable, touch pad controller with the following functions:
<
• Full text vacuum florescent display (VFD) with interactive compressor diagram.
• Operating mode selection: constant run, low demand with reservoir blow down, automatic stop/start with timed blow down and sequence (up to 8 units), all with modulating inlet valve or load/no lode control.
• Emergency stop button.
• Power interruption protection.
• High speed electronic modulation control
• Thermally controlled fan motor on air cooled units.
• Contacts for remote start/stop operation plus remote monitoring
• Complete system diagnostics through VFD.
  • Displays for hour meter, loaded hours, total run time, discharge air temperature, system/reservoir pressure, separator differential pressure and motor amps.
  • VFD advisory lamps, light yellow on diagram, displays service for air filter, change separator, oil and oil filter change, high/low temperature, sequencing communication error, and high motor amps.
  • VFD protective shut down lamps, light red on diagram, displays high temperature, low oil pressure, main motor overload, fan motor overload, high pressure, change separator, choice of one field-selectable message: High vibration, phase relay, motor protector, and low voltage.