header_concept

Back


ES-40, 50 hp
(Electra Screw Series)
Features:
Belt Drive Low Purchase Price "S" Series Controller 141 - 221 CFM, 100-150 p.s.i.
Model EDE
ES-40
Pressure
CFM
BHP
100
185
44
125
160
43
150
141
43
Dimensions
79" x 42" x 43" (L x W x H)
Shipping Weight
1,700 lbs, (1,950 enclosed)
Model EDE
ES-50
Pressure
CFM
BHP
100
221
44
125
201
43
150
173
43
Dimensions
79" x 42" x 43" (L x W x H)
Shipping Weight
1,760 lbs, (2,010 enclosed)

Standard Equipment:
  • Rotary Screw Air Compressor with modulating inlet valve.
  • 460-230/3/60 1.15 SF, ODP, Epact "energy efficient" motor.
  • Adjustable Sliding motor base.
  • OSHA approved steel drive guard.
  • Rigid steel base with fork lift slots.
  • Stainless Steel Control Lines.
  • 5 micron "dry type" air inlet filter.
  • ASME air/oil reservoir with Eliminator air/oil separator.
  • 10 micron full flow oil filter.
  • Heavy-Duty radiator type oil cooler/aftercooler.
  • Moisture separator and trap.
  • Pressure relief valve.
  • Air/oil separator pressure relief valve.
  • Minimum discharge pressure relief valve.
  • Thermal mixing valve.
  • Automatic blow down valve with muffler.
  • All galvanized steel pipe fittings and steel piping.
  • Factory fill AEON 4000 rotary screw lubricant.
  • Modulating capacity control system.
  • Automatic "low demand" mode reservoir blow down.
  • NEMA 12 Enclosure:
  • Mounted and wired full voltage starter.
  • Auto Sentry "S" solid state controller
  • Control voltage transformer and hour meter C.S.A. recognized electrical components and wiring

Optional Equipment:
  • Full acoustic enclosure with access doors.
  • NEMA 4 (IP66) control enclosure.
  • Seacoast (air-cooled) or saltwater (water-coooled) coolers. Factory fill AEON 9000SP synthetic lubricant.
  • Factory fill AEON 6000FG food grade lubricant.
  • Alternative voltages.
  • TEFC or Premium Efficiency Motors.
  • Remote mounted air cooled aftercooler.